Крепление балки

Соединители для плотницких конструкций / Крепление балки

• Материал: сталь оцинкованная после механической обработки
• Применение: соединение деревянных балок
• Материал: сталь оцинкованная после механической обработки
• Применение: соединение деревянных балок
• Joist Hanger
  Joist Hangers are designed for use where a strong, rigid joint is required between members meeting at 90?, e.g. truss/joist to beam, or rafter to bearer connection.
  Material： DX51D-Z275/G300-Z275
  Process： Stamping/Punching/Bending
  Size： Can be customized
  Surface： Galvanized sheet
  Type： Wood connector
  Quality： MOQ 2000pcs
  Packaging： General standard export packing/Accept customized packaging

  Specifications

  Joist Hangers
  0.91mm G300 Z275 / DX51D-Z275 Galvanised Steel
  Joist Hanger 47 x 90
  Designed for use where gauged timber of 47mm width and up to 150mm deep.
  
  Joist Hanger 47 x 120
  Multi-use bracket suitable for gauged 47mm thick timber up to 200mm deep.
  
  Joist Hanger 47 x 190
  Used for gauged 47mm thick timber up to 300mm deep.
  
  Joist Hanger 70 x 180
  A special size joist hanger designed for gauged 69mm wide timbers.
  
  Joist Hanger 95 x 165
  For use on gauged 94mm wide timber or double joists/trusses.
  
  Note: Joist Hangers 52mm wide also available for rough sawn timber.
  
  All of the above Joist Hanger connections should be fixed using nails 30mm x 3.15mm diameter, or Type 17-12g x 35mm Hex Head Screws.
  
  NOTE: Our factory provide custom processing services, can be produced according to customer's drawings. 
•